You are here:
Aluminum flat gangway
L: Length H: Height B:Width 
Technical requirement:
1. Parts made of aluminum must be oxidized according to standard CB 1292-81 2. The max usage agle of this gangway is 30degree. 3.Finished framework of gangway should not changed in shape as the standard CB 3116-82. ISO 7061-1993 4. Load test, when the part ladder is supported horizontally on both and supports and upplied with a 408kg in per square meter,there shall be no deflect in any parts and also the maximum deflection value of the mddile of the ladder shall not exceed 93mm. |
Cell Phone:0086-13151697139
Aluminum flat gangway
Time:2023-03-29 16:20
Author:admin
Marine outfittings
Aluminum flat gangway
Time:2023-03-29 16:20
From:未知
Author:admin
|
Aluminum flat gangway
L: Length H: Height B:Width
Technical requirement:
1. Parts made of aluminum must be oxidized according to standard CB 1292-81 2. The max usage agle of this gangway is 30degree. 3.Finished framework of gangway should not changed in shape as the standard CB 3116-82. ISO 7061-1993 4. Load test, when the part ladder is supported horizontally on both and supports and upplied with a 408kg in per square meter,there shall be no deflect in any parts and also the maximum deflection value of the mddile of the ladder shall not exceed 93mm. |
© 2019 Zhenjiang Normanship Co.,Ltd. All rights reserved
Copyright © Zhenjiang Normanship Co.,Ltd. All rights reserved . Technical Support:Erun